OTERR=0, PRGERR=0, SECERR=0, FESETERR=0, ILGLERR=0, ERSERR=0, ILGCOMERR=0, FRDY=0, ERSSPD=0, DBFULL=0, SUSRDY=0, PRGSPD=0, FLWEERR=0
Flash Status Register
FLWEERR | Flash Write/Erase Protect Error Flag 0 (0): An error has not occurred 1 (1): An error has occurred. |
PRGSPD | Programming Suspend Status Flag 0 (0): The flash sequencer is not in the programming suspension processing state or programming suspended state 1 (1): The flash sequencer is in the programming suspension processing state or programming suspended state. |
ERSSPD | Erasure Suspend Status Flag 0 (0): The flash sequencer is not in the erasure suspension processing state or the erasure suspended state 1 (1): The flash sequencer is in the erasure suspension processing state or the erasure suspended state. |
DBFULL | Data Buffer Full Flag 0 (0): The data buffer is empty 1 (1): The data buffer is full. |
SUSRDY | Suspend Ready Flag 0 (0): The flash sequencer cannot receive P/E suspend commands 1 (1): The flash sequencer can receive P/E suspend commands. |
PRGERR | Programming Error Flag 0 (0): Programming has completed successfully 1 (1): An error has occurred during programming. |
ERSERR | Erasure Error Flag 0 (0): Erasure has completed successfully 1 (1): An error has occurred during erasure. |
ILGLERR | Illegal Command Error Flag 0 (0): The flash sequencer has not detected an illegal FACI command or illegal flash memory access 1 (1): The flash sequencer has detected an illegal FACI command or illegal flash memory access. |
FRDY | Flash Ready Flag 0 (0): Program, Block Erase, Multi Block Erase, P/E suspend, P/E resume, Forced Stop, Blank Check, or Configuration set command processing is in progress 1 (1): None of the above is in progress. |
OTERR | Other Error 0 (0): A status clear or forced stop command processing is complete 1 (1): An error has occurred. |
SECERR | Security Error 0 (0): A status clear or forced stop command processing is complete 1 (1): An error has occurred. |
FESETERR | FENTRY Setting Error 0 (0): A status clear or forced stop command processing is complete 1 (1): An error has occurred. |
ILGCOMERR | Illegal Command Error 0 (0): A status clear or forced stop command processing is complete 1 (1): An error has occurred. |